Click on the thumbnail to view a larger image - 1600 x 1200. All of these
photos were taken by me with a Nikon Coolpix 800
July 17th through August 3rd, 2003
The Definitive Autolite 2100 AMC / Jeep 258 Swap Guide
Page 5
From the back
The throttle bracket was installed where the factory garbage
was.
A nice shot of the return bracket.
Done! :)
At some point I cut the automatic transmission kick down
stuff off of the linkage. I don't need it since mine is a 5-speed.
Picture will be added here
No picture yet, but I wanted to make a note so I wouldn't
forget. Before you put the carb on the car change the flat
head screws for the choke over to cap head screws or you'll have lots of
fun trying to adjust it... It's kinda hard to get a screw driver in there
- ask me how I know. Use 3 8x32x1" cap heads.